Write us to: info@inshoresafety.com or fill the form.
We are happy to meet you during our working hours.
The product is designed for water rescue of people and lighter equipment (max. working load 500kg/1100lbs). No installation is required, the product can be used immediately after unpacking.
Attention!
NOTICE! Due to UV radiation, the color of the product may change.
The product is designed for water rescue of people and lighter equipment (max. working load 250kg/550lbs). The product is ready for use immediately after unpacking.
You can attach one end of the rope to a fixed point with a grab loop on the rope, or the carabiner, or the carabiner hooked into the loop, then throw the rope bundle towards the person to be rescued. The person in the water can do the following:
Then pull the victim toward yourself until he/she can be grabbed by hand and helping him/her to be safety. The rope can also help to lift the victim on board.
Always keep the rope coiled in order to be used immediately if necessary.
Attention! The product can float on the water by itself or connected to floating objects. Non-floating objects can pull it under water!
The product is designed for water rescue of people and lighter equipment (max. working load 250kg/550lbs). The product is ready for use immediately after unpacking.
Secure the rope to a fixed point using the black carabiner at the end of the floating rope. If you are unable to do so, attach it to yourself. Pull off the rope bundle from the rope holder and drop it in a place where the rope can run freely (e.g. on the ground or in the water). Throw the handle towards the person to be rescued. If the throw is not adequate, pull back the handle and coil the rope onto the holder in a figure of eight so that the successive loops are top of each other. Repeat the throwing procedure. If the throw is successful, the victim is able to notice the handle in the water and can safely grab it or attach a floating device to the colored carabiner. Pull the victim towards yourself until the victim can be grabbed by hand and helping him/her to be safety.
Always keep the rope coiled in a figure of eight on the rope holder so that it can be used immediately if necessary.
Attention! The product can float on the water by itself or connected to floating objects. Non-floating objects can pull it under water!
The product is designed for rescuing people from water (max. working load 250kg/550lbs). The product must be installed on a suitable flotation device before use.
For detailed information please visit the INSTALLATION page.
The product can be used in several ways depending on the rescuer’s preferred rescue method.
For detailed information please visit the USE OF CLS page.
Redesigned tools – Simplified tasks
Innovation for Boating Safety